Skip to main content
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
Modular Roof Rack For The Ford Bronco 2-Door (2021-Current) - Spirit of 1876 - TrailRax
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
Modular Roof Rack For The Ford Bronco 2-Door (2021-Current) - Spirit of 1876 - TrailRax
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
TrailRax Modular Roof Rack for Ford Bronco 2-Door (2021-Current), Direct Bolt-On, No Drilling
Modular Roof Rack For The Ford Bronco 2-Door (2021-Current) - Spirit of 1876 - TrailRax
Modular Roof Rack For The Ford Bronco 2-Door (2021-Current) - Spirit of 1876 - TrailRax

$1,059.99
$1,324.99

Key Features:

  • Fits: Ford Bronco and Bronco Raptor (6th Gen, 2-Door, 2021+)

  • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).

  • Pak Rax load rating: 70 lbs per side evenly distributed

  • Static load rating of the rack: 850 lbs evenly distributed across the rack verified in CAD and real life testing

  • Dynamic load rating of the rack: 300 lbs evenly distributed across the rack  verified in CAD and real life testing

    • These ratings are rated and measured WITH Pak Rax option. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.

  • Higher weight capacity than the OEM roof rack and others

  • Easy bolt-on rack install

  • Wind deflector to minimize wind noise

  • Cutouts for high-performance off-road lights

  • All aluminum construction to avoid rust and corrosion

  • Patented Pak Rax option to increase storage capabilities

TrailRax was the first to build a roof rack for the Ford Bronco 6th Gen— and it’s still the best one on the market. The long-awaited TrailRax Ford Bronco 2-Door Roof Rack is designed to work seamlessly with the TrailRax Pak Rax, giving you endless gear-mounting options for overlanding and off-road adventures. Built from 5052 3/16" aluminum, the one-piece side panels offer extreme rigidity, durability, and load capacity, with a 90-degree bent channel providing 360° mounting flexibility for additional accessories.

Our precision anodized black aluminum extrusions (TSLOTS) are made in Utah, cut to length, and stress-tested for maximum weight capacity and minimal deflection. Crossmembers include machined cutouts for easy hardware installation without removing the bars.

The included wind deflector minimizes wind noise, and the cutout is compatible with Heretic Studio or Baja Designs 40" off-road lights, allowing flush mounting while keeping the rack level.

Installation is simple: the clamping system mounts to the OEM Ford hardtop, with front rails attaching to existing windshield studs for added stability. The Pak Rax mounts directly to the side panels, distributing weight and reducing stress on the MIC hardtop.

This rack is perfect for overlanders, desert racers, and off-road enthusiasts, with modularity that allows upgrades and accessory additions over time. MIC hardtop required. Fits all trims of the Ford Bronco 2-Door.

Recommended Brands & Accessories for Your TRMR Rack

While the TRMR Rack works with many brands, these partners collaborated with us during its design to ensure their products fit seamlessly. Choosing gear from these brands guarantees easy installation, perfect compatibility, and high-quality performance—so you can accessorize your rack without headaches and focus on your next adventure.

Hit this link!

Ford rates the Bronco roof with a factory rack at "Max load 110 lbs dynamic and 450 lbs static evenly distributed." All these weights will be at your discretion as they are above Ford's "recommended" capacities. We build our rack to be capable on its own of withstanding 850 lbs static, and 300 lbs dynamic. GVWR and other factors such as roof materials, the center of gravity, and wind dynamics all apply to any load you put on top of a vehicle, and you, as the user, are responsible for the safe loading and operation of your vehicle. Please review your Owner's Manual to review your recommended payloads for your Bronco. If you need more information please contact us at info@TrailRax.com.

The TrailRax Modular Roof Rack For The Ford Bronco 2-Door (2021-Current) is an all-aluminum, direct bolt-on roof rack for 2021+ 2-door Ford Bronco and Bronco Raptor owners who need modular cargo mounting for overlanding, road trips, and off-road travel. It installs with no drilling required.

Key Features & Specs

  • Vehicle fitment: Fits 6th Gen, 2-door Ford Bronco and Bronco Raptor models from 2021 onward. MIC or Painted hardtop.

  • Rack height: Adds 3.845 inches from the center of the hardtop, or 3.345 inches from the highest outer edges of the hardtop.

  • Construction: 5052 3/16-inch aluminum one-piece side panels with a 90-degree bent channel, plus precision anodized black aluminum TSLOTS crossmembers.

  • Load ratings with Pak Rax: 850 lb static and 300 lb dynamic, evenly distributed across the rack, verified through CAD and real-world testing. Pak Rax load rating is 70 lb per side when evenly distributed.

  • Mounting system: Direct bolt-on installation with no drilling required. The clamping system mounts to the OEM Ford hardtop, and front rails attach to existing windshield studs.

  • Wind deflector options: Available with a Standard Deflector or a 40-inch Light Bar Cut Out Deflector.

  • Lighting compatibility: The 40-inch light-bar cutout supports flush mounting for 40-inch off-road light bar while keeping the rack level.

  • Modular mounting: Side-panel mounting channels and crossmember cutouts support accessory installation without removing the crossbars. Pak Rax is available as an option for additional side storage and weight distribution to the vehicle body.

  • Load-use notice: Ford rates the factory roof rack at a maximum of 110 lb dynamic and 450 lb static, evenly distributed. Vehicle payload, roof materials, center of gravity, wind dynamics, and the Owner's Manual recommendations apply to all roof loads.

How it Compares

Feature

This Product

Why It Matters

Compatibility

Fits Ford Bronco and Bronco Raptor (2-Door, 6th Gen, 2021+), all trims, MIC and Painted hardtop

Ensures precise fit for a range of 2-door Bronco models to maximize utility and stability

Load Capacity

Static load: 850 lbs, Dynamic load: 300 lbs (evenly distributed, with Pak Rax)

Supports heavy gear for overlanding or adventure trips, providing strong and reliable rooftop storage

Material

5052 3/16" aluminum construction, anodized black extrusions

Offers durability, rust resistance, and long-lasting performance in tough outdoor conditions

Installation

Direct bolt-on, no drilling required

Quick, secure installation without permanent modification to your vehicle

Modularity and Accessory Compatibility

One-piece side panels with 90-degree bent channel; cutouts for lights; Pak Rax integration

Enables versatile mounting for a range of gear and lighting, supporting evolving expedition needs

Wind Noise Management

Included wind deflector; optional 40" light bar cutout

Reduces highway noise and supports flush-mount off-road lighting customization

Recommended Use Cases

  • Building a 2-door Bronco for multi-day overlanding trips with adaptable mounting points for rooftop gear.
  • Adding organized exterior cargo capacity for camping equipment and road-trip essentials.
  • Configuring an off-road travel setup that can be expanded with compatible rack accessories over time.
  • Preparing a Bronco for desert travel or trail use where rooftop storage and optional forward lighting are part of the build.
  • Supporting frequent rooftop gear transport while accounting for vehicle-specific payload and roof-load guidance.

Frequently Asked Questions

What are the best roof racks for a 2-door Ford Bronco to carry extra gear on road trips?

The TrailRax Modular Roof Rack is built for 2021-current 6th Gen Ford Bronco 2-Door and Bronco Raptor models with a MIC hardtop, offering modular 360-degree mounting flexibility for additional gear. It is a direct bolt-on installation with no drilling required, using the OEM hardtop mounting points and existing windshield studs.

Can this roof rack handle heavy camping and overlanding gear on a 2021 or newer Bronco?

The TrailRax Modular Roof Rack is rated at 850 lbs static and 300 lbs dynamic when weight is evenly distributed across the rack, with ratings verified in CAD and real-world testing. Ford's stated factory-rack guidance is 110 lbs dynamic and 450 lbs static, so users are responsible for following safe-loading practices, vehicle payload limits, and Owner's Manual guidance.

Is this a low-profile modular roof rack for a 2-door Bronco?

Yes, the TrailRax Modular Roof Rack adds 3.845 inches from the center of the hardtop or 3.345 inches from the hardtop's outer edges. Its 5052 3/16-inch aluminum side panels and anodized aluminum TSLOTS provide adaptable mounting locations for overlanding and off-road accessories.

What should I look for when choosing a Bronco roof rack for off-road travel?

Look for a rack with secure vehicle-specific mounting, a stated dynamic load rating, corrosion-resistant construction, and flexible attachment points for the gear you plan to carry. This TrailRax Modular Roof Rack has all-aluminum construction, a wind deflector to help minimize wind noise, and options with or without Pak Rax plus standard or 40-inch light-bar cutout deflectors.

How does the Pak Rax option help when carrying roof-mounted gear?

The available Pak Rax is designed to distribute weight to the Bronco body, reducing stress on the MIC or Painted hardtop and expanding side-mounted storage possibilities. It is rated for 70 lbs per side when weight is evenly distributed.

What people are saying about us

Testimonials

Angela M

Can’t say enough good things about Mike and the Spirit team. Definitely the go-to shop for all things camp / overland / outdoor. He helped me figure out what roof rack would work best for my 4Runner, and the rooftop tent + awning that fit my budget and what I was looking for. Don’t miss out on their camp accessories and gear either — 5 stars all around.

Thomas H.

Mike over at Spirit is an absolute legend in the overlanding space here in Colorado. He’s been in the industry long enough to easily identify a fad versus a trend and is passionate about quality products that will make your time outdoors better. He knows the products he sells and is committed to finding the perfect fit for your adventure rig. I can’t recommend him and his team enough.

Alex M.

Mike and Spirit of 1876 are top notch, he's the most knowledgeable person I've found in the overland/accessory market and he'll tell you what products are worth your while, and which are not based on real world experience... He sells only the best products, and doesn't sell what's popular just because XYZ company put a bunch of money into marketing. Trust Mike with your next purchase of anything in the overland accessory field, he won't steer you wrong.